As drilling technology improves and wells become deeper, liner hangers play an increasingly important role in modern drilling programs. Many unique features place the Rigger Engineering liner hanger head and shoulders above the competition.

True-Radius Slip Design

Rigger’s “true-radius” liner hangers have a constant radius between the slips and the inclined surface of the pockets.

• Radius matches the radius of the containment pocket.
• Unlike traditional cone hangers, our superior design allows for even weight distribution throughout the radius – no matter where the slip bites into the casing.
• Liner load is 100% supported by the slips in the pocket, which reduces the chance of damage or breakage due to overstressing the slips.

Fully-Recessed Slips

The Rigger liner hanger was the first to incorporate a recessed pocket design.

• Pockets are machined into the side of our liner hangers to house the spring-loaded slips.
• Flushmount design prevents hang-ups while tripping into the hole, offering critical advantages in high-angle or dog-legged wells.
• Keeps slips contained within a pocket until they are released.
• Reduces the chances they will hang up on a dogleg or some other obstruction.
• Each slip operates independantly, allowing for more flexability in the hanging operation.

Mechanical Release Mechanism

Rigger hangers are virtually infallible when using a mechanical releasing tool and it is near impossible to release the slips prematurely.

• All Rigger liner hangers require right-hand rotation to set, eliminating the possibility of accidentally unscrewing the liner.
• With our standard right-hand release mechanism, the setting tool requires five to six rotations to hang the liner. This prevents the hanger from setting prematurely and results in a very low failure rate.
• Unlike a typical ‘J’ slot hanger, which generally requires as little as 1/6th of a turn to the left to release the slips, the Rigger liner hanger incorporates spring loaded slips that require the operator to rotate to the right to release.

Comments are closed.